HPE ProLiant DL385 Gen10: Specs and Rack Compatibility

The HPE ProLiant DL385 Gen10 Plus Server is defining what it means for cost and performance to go hand in hand by using new arithmetic for virtualized computing. This server is also changing what it means for performance and affordability to go hand in hand. The HPE ProLiant DL385 Gen10 Plus Server is equipped with PCI Express Gen4 capabilities. This two-processor, two-rack-unit server was designed with flexibility in mind, so it has a high core count and a large memory footprint in addition to its flexible construction. Utilize this system that was developed especially for the purposes of virtualization, high speed computing, and applications that are memory-centric.

The HPE Flexible Slot (Flex Slot) Power Supplies all have the same electrical and physical design, which enables them to be installed into HPE ProLiant Gen10 Plus Performance Servers by simply plugging them in without the need for any additional tools. By using Flex Slot power supplies, which have been validated for high-efficiency operation and provide a number of different choices for the amount of power that may be produced, users will be able to "right-size" a power source to correspond with the configuration of a certain server. Flex Slot power supplies are also designed to be backwards-compatible with existing server designs. Because of this flexibility, power waste can be cut down, total energy costs can be brought down, and "stuck" power capacity can be avoided in the data center. Every pre-configured server comes with a standard IEC C-13/C-14 jumper wire of 6 feet in length (A0K02A). Each normal AC power supply option kit also comes with this jumper cable included.

You May Also Like To Read: HPE ProLiant DL380 Gen10: Specs and Rack Compatibility

Standard Features

HPE Server UEFI/Legacy ROM

The Unified Extensible Interface, or UEFI, is an industry standard that, in comparison to the conventional ROM, provides greater administration and a more secure setup. This occurs when the UEFI is communicating with your server during the boot process. Both the UEFI Mode, which is now set as the default, and the Legacy BIOS Mode are supported by the HPE ProLiant Gen10 Plus servers. A UEFI Class 2 version is included in these server machines.

UEFI allows a wide variety of brand new features that are exclusive to HPE ProLiant servers, including the following:

  • Support for boot devices larger than 2.2 terabytes (when using GPT)
  • USB 3.0 Stack 
  • Operating system-specific capabilities 
  • Secure Boot and Secure Start allow for greater security

HPE Server UEFI/Legacy ROM

Embedded UEFI Shell 

Support for PXE boot for IPv6 networks 

Mass Configuration Deployment Tool that makes use of the iLO RESTful API and is Redfish API Conformant

 Workload Profiles to facilitate straightforward efficiency enhancement Only in the UEFI Boot Mode:

  • Support for TPM 2.0; 
  • Support for NVMe Booting; • Support for iSCSI Software Initiator.
  • Support for HTTP and HTTPs Boot as an alternative to PXE.
  • Support for starting up on option cards that can only run UEFI option ROMs

Smart Update

Maintain the most recent software on your servers with the help of the HPE Smart Update solution. To do this, use the Smart Update Manager (SUM) to streamline the process of updating the firmware and drivers included in the Service Pack for ProLiant (SPP).

Amplifier pack for the iLO 

It is possible to identify, inventory, and upgrade Gen8, Gen9, Gen10, and Gen10 Plus HPE systems at an unequaled speed and scale with the help of the iLO Amplifier Pack, which is an open virtual app (OVA) that can be downloaded for free. It was developed for use in situations with hundreds of HPE servers, such as those seen in big businesses and service provider setups.

The HPE iLO Mobile

The application provides you with the power to access, install, and administer your server at any time and from any location using certain mobile phones and other portable electronic gadgets.

Instrument for RESTful Interface

The RESTful Interfaces tool, which is also known as iLOREST, is a single coding tool that enables users to locate and deploy servers at scale by using the iLO RESTful API.

Tools for Scripting

You are able to offer anywhere from one-to-many servers by constructing your own scripts to locate and install them by utilizing the Script Tool (STK) for Windows and Linux. These scripts may be used to discover and install the servers. or Powershell Scripting Tools, if you like. These utilities may be used on computers running either Linux or Microsoft Windows. These tools may be used on machines that are operating on either Microsoft Windows or Linux.

Standard Version of HPE OneView

There are no extra costs associated with using HPE OneView Standard for inventory management, health monitoring, alerting, or reporting purposes. It is capable of monitoring many versions of HPE servers. The user interface is quite similar to the one seen in the advanced edition of HPE OneView; however, software-defined functionality is unavailable.

HPE Systems Insight Manager (HPE SIM)

It offers you the ability to manage the health of your HPE ProLiant Server with HPE Security Systems, which makes it ideal for scenarios that presently use HPE SIM. [CDATA[[It provides you with the capability to check the condition of your HPE ProLiant Server and HPE Security Servers.] In addition to this, you will get foundational support for systems that are not branded with the HPE name. In addition, HPE SIM collaborates with Smart Updates Manager to make available firmware updates in a way that is both simple and quick.


This product is supported by HPE Services and a global network of Hewlett Packard Enterprise Certified Channel Partners distributors. Additionally, it is backed by a limited warranty that applies anywhere in the globe. After the date of purchase, customers have access to diagnostic assistance and repair services for a period of three years. After the first purchase, you get access to support for the product and the initial setup for a period of ninety days. Whether you make use of HPE Pointnext's operational services or one of their tailored service agreements, you may get improvements to the warranty services you get. Hard drives typically come with either a one-year or three-year guarantee; for further information, see the quick specs of the particular hard drive in question.

The following is a list of other security-related features:

Support for UEFI Secure Boot and Secure Start 

  • Tamper-free updates – components digitally signed and verified 
  • UEFI Secure Boot and Secure Start support 
  • Immutable Silicon Root of Trust 

HPE Server Management iLO Advanced

All HPE ProLiant servers are qualified for complete and unlimited access to the intelligent remote capabilities made available by HPE iLO Advanced licensing. This access is available to all HPE ProLiant servers. The license provides the user with access to a completely integrated distant console, a keyboard shortcut, video, and mouse (KVM), multi-user cooperation, console recording and replaying capabilities, as well as graphical user interface (GUI)-based and scripted virtual media and virtual folders. In addition, the user can record and replay console sessions. You have the option of turning on the function to provide an increased level of safety and improved power management.

The advanced version of HPE iLO's premium security edition

The HPE iLO Pro Premium Protection Edition for iLO 5 comes with a number of secure communications modes and features, including the iLO Advanced License, which is one of those features. Quick firmware recovery, realtime firmware validation, and secure erase are a few examples of additional modes and features that are very safe.

The Advanced Version of HPE OneView

When it comes to the provisioning, upgrading, and merging of compute, storage, and networking infrastructure, HPE OneView uses a template-driven approach. The procedure for managing a firm's infrastructure is given an additional degree of automation as a result of this development. It provides licenses that include all of the obtainable capabilities and are available for purchase. These licenses may be used for the administration of Gen8, Gen9, and Gen10 servers.

Utility for the management of HPE Insight clusters (CMU)

A HyperScale management framework, HPE Insight Cluster Administration Utility comprises software for the centralized provisioning, management, and monitoring of nodes and infrastructure. This software is part of the HPE Insight Cluster Management Utility.

Information Regarding Accelerators and GPGPU

Hewlett Packard Enterprise offers a broad variety of accelerators on a selection of HPE Proliant servers in order to support a wide variety of workloads. These servers come in a number of configurations. Accelerators make it easy to combine GPU computing with HPE ProLiant servers, which is beneficial for high-performance computing, enormous data center visualizations, machine learning, and virtualization deployments. Accelerators also make it simple to incorporate GPU computing with HPE Integrity servers. In addition to providing all of the scales that are associated with GPU computing, these accelerators offer maximum consistency and tight interplay with system monitoring and control tools such as the HPE Insight Kubernetes Utility. These are just some of the benefits that GPU computing is known for. These benefits include faster processing times and lower power consumption.

Infrastructure for Racks and Power Supplies

The chapter may come to a close with servers, but it opens with the foundation that enables computation to take place and fosters the expansion of businesses. We have completely rethought our product line of racks and power supplies in order to make information technology infrastructure safer, more usable, and more effective. To put it another way, in order to assist you in getting the most out of the technology that you have invested in, we have developed an infrastructure that is not only more robust but also more intelligent and straightforward. Hewlett Packard Enterprise, which is a market leader, is in a position that cannot be equalled by its rivals in terms of its ability to tackle the major difficulties of system access, cable management, power, and cooling. These racks are available in two different configurations: advanced and enterprise. HPE G2 Power Distribution Units (PDUs) provide reliable power in a variety of form factors. They are able to work in climates with temperatures as high as 60 degrees Celsius, have color-coded outlets and load segments, and have a reduced design that allows for optimal access to the rack as well as assistance for dense rack environments. These PDUs also have a number of other desirable characteristics. Uninterruptible power supply (UPS) systems from HPE provide power security that is not only effective but also reasonably priced for any sort of application. A number of uninterruptible power supplies (UPSs) come with features like remote administration and extended runtime modules to ensure that your important dense data center is protected in the event of a power loss. The HPE KVM Solutions package includes a console as well as switches that have been developed to function dependably with your server and other IT equipment. In order to maintain the functionality of your data center rack, we provide a KVM switch that is both affordable and efficient for your first rack, in addition to IP switches that support multiple connections and come equipped with remote administration and security features.

You May Also Like To Read: UK Server Colocation Provider

Colocation FAQs

About Server Colocation UK

Our servers are located in our own data center which is located in Derby, United Kingdom.
The data center is fully owned and managed by Data center plus, giving us the flexibility to work with our customers requirements and provide unrivaled levels of support.

Our data center is located next to Mansfield Road, Derby, UK. We are very accessible.
Our address is: Suite 18, Parker House, Mansfield Road, Derby, DE21 4SZ

Tour of our data center facilities is reserved for customers who are looking for colocation services with Data center plus.
If you would like to visit the data center, we must receive at least 24 hours notice.
You will also require to bring a form of ID in the form of a passport or driving license. We cannot allow anyone into the data center failing these requirements.

If you would like to place an order please contact us directly.
You can contact our sales team directly on 0808 169 7866 or emailing info@servercolocation.uk.
If you are an existing customer, log in to the site and simply check out after selecting your new service and proceed to payment options. The details of your new service will be added to your account portal.
If you are placing an order that is an upgrade to your existing one, get in touch with your account manager or raise a support ticket at info@servercolocation.uk.


If you are experiencing issues with your server, we recommend that the first you do is to raise a support ticket with our support team.
This can be done by sending an email to info@servercolocation.uk.
Alternatively, if the matter is time sensitive, feel free to give us a call on 0808 169 7866 and select the option for Support.
We have a 30 minute SLA response time to any ticket raised.

Remote hands cover requests made within office hours.
Our Remote Hands service covers assistance with the following items:
– Server reboots
– CDROM connect/disconnect
– Cable checks and moving network cables.
– Checking/relaying diagnostics information back to the customer.
If you require services outside of the above (for example, installation of software), we can provide this as part of our Additional Services, which is chargeable. Please contact your account manager or our helpdesk for further information.

Support for hardware failure is 24/7/365 on our Managed Servers.
Most failed hardware components can be replaced within 1 hour (during office hours and subject to parts being in stock.
Office Hours: 08:30 – 18:00

Emergency support work